Haier LE55K800 Flat Panel Television User Manual


 
7
Plug one end of the power cord into the input port of the machine's power supply and then insert the
other end into the socket of the electrical source (AC 100V-240V, 60/50Hz).
Notes:
1. When connecting the power cord, be sure to turn
off the machine and other equipment's power.
2. If a long time at leisure, please disconnect it from
power supply
3. This TV must be connected to a three pin socket
outlet for safety.
Please connect one end of VGA cord with the output
port of the computer (available for both desktop or
laptop computer), and another end of VGA cord with
the input port of the VGA on its rear cover.
Connect external HDMI high signal source to HDMI
digital input port of this machine through HDMI
digital connector cable; push"SOURCE" button to
select HDMI signal source. (
)
Through composite cable, connect AV equipment
VIDEO output termination to this machine VIDEO
input, and AV equipment AUDIO output termination
to this machine AUDIO input, respectively.
If you need watch image of DV and connect your
TV game machine, you can connect audio or video
output end of DV and game machine to the monitor.
If the signal source is DVD, Digital wired receiver
or equipments with the YPbPr/YCbCr output,
recommends you to connect YPbPr or YCbCr
output with the TV YPbPr/YCbCr input. In order to obtains the better picture
quality, at the same time, please connect its audio output with TV audio input
as shown in the following chart. If you choose the YPbPr/YCbCr signal, please
set signal source selection under YPbPr pattern.
Specific HDMI interface
amount in accordance with work order.
Installation & Connection
Y
W
R
W
R
B
G
R
USB
AV machine
CVBS, DVD Player or other
machine with YPbPr/YCbCr.
Y Yellow (VIDEO)
W White(AUDIO-L )
R Red (AUDIO-R, Pr/Cr)
G Green (Y)
B Blue (Pb/Cb)
Power Connection
Computer Connection
HDMI Digital Port Connection
AV Video Signal Connection
AV Output Connection
YPbPr/YCbCr Input Connection