Filter
Top Products
45
2.4 Using the TV
2.4.1 Using the Remote Control
For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at the
TV.
Notes:
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.
2.4.2 Turning the TV On and Off
1
Press
on the remote control or
POWER
on the control panel.
The power LED indicator on the front of the TV changes from red to
green, indicating that the power is on.
2
Press or
POWER
again. The power LED changes from green to
red, indicating that the TV is off
.
2.4.3 Selecting Channels
•Press CHS / PS on the remote control or CHS on the control panel
to increase the channel number by one. Press CHT / PT or CHT to
decrease the channel number by one.
• Enter the specific channel number by pressing the number buttons
on the remote control. The channel number is displayed on the
screen.