Filter
Top Products
6 FRONT PANEL CONTROLS
Front Panel Controls
0
Main Information Display: This display
delivers messages and status indications to help
you operate the DVD player.
1
Power On/Off (Standby): Press the button
once to turn the DVD player on, press it again to
put the unit in the Standby mode.
2
Eject: Press this button to open or close the
Disc Tray.
3
Play: Press to initiate playback or to resume
playback after Pause has been pressed.
4
Pause: Press this button to momentarily
pause playback. To resume playback, press the
button again. If a DVD is playing, action will
freeze and a still picture will be displayed when
the button is pressed.
5
Stop: Press this button once to place the
disc in the Resume mode, which means that
playback will stop, but as long as the tray is not
opened or the disc changed, DVD playback will
continue from the same point on the disc when
the Play Button is pressed again. Resume will
also work if the unit was turned off.To stop a
disc and have play start from the beginning,
press the button twice.
6
Skip/Search (Previous): Press this button
to move backward through the music tracks on
a CD disc or the chapters on a DVD disc. Keep
the button pressed to search backwards at one
of the available speeds.
7
Skip/Search (Next): Press to move forward
through the music tracks on a CD or the chap-
ters on a DVD disc. Keep the button pressed to
search forwards at one of the available speeds.
8
Dimmer: Press this button to reduce the
brightness of the Information Display by 50% or
to turn the display off completely in the
following order: FULL BRIGHTNESS ➔ HALF
BRIGHTNESS ➔ OFF ➔ FULL BRIGHTNESS.
0
Main Information Display
1
Power On/Off (Standby)
2
Eject
3
Play
4
Pause
5
Stop
6
Skip/Search (Previous)
7
Skip/Search (Next)
8
Dimmer
DVD 22
1 3 4 5 6 7 8
2 0
20825_DVD22 Eng_new 17/08/04 12:24 Side 6