Filter
Top Products
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE:
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP DL120G6 NHP CTO Chassis
490933-B21
Includes:
Embedded NC107i Gigabit Server Adapter
1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI
Express x4 slot (x8 lane)
Integrated 6 Port SATA Controller
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
HP DL120G6 HP CTO Chassis
583183-B21
Includes:
Embedded NC107i Gigabit Server Adapter
Hot-Plug drive cage, including cables
1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI
Express x4 slot (x8 lane)
Integrated 6 Port SATA Controller
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processor
Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3),
FIO
581869-L21
Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo
1/1/2/3), FIO
578471-L21
Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/4), FIO
581870-L21
Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/5), FIO
578473-L21
Intel® Xeon® processor X3470 processor (2.93GHz, 95W, 8MB, 1333, HT,
Turbo 1/1/4/5), FIO
578475-L21
Memory
Unbuffered with ECC DIMMs (UDIMM)
HP 2GB 2Rx8 PC3-10600E Kit
500670-B21
HP 1GB 1Rx8 PC3-10600E Kit
500668-B21
Registered DIMMs (RDIMM)
HP 2GB 2Rx8 PC3-10600R-9
500656-B21
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
500660-B21
NOTE:
All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
.
NOTE:
Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-
efficient
Hard Drives
NOTE:
The components of a storage subsystem (e.g. the drive, the
QuickSpecs
HP ProLiant DL120 Generation 6
Configuration Information - Factory Integrated Models
DA - 13504 Worldwide QuickSpecs — Version 3 — 12.18.2009
Page 12