Filter
Top Products
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.30 B
LpAm
44.1 dBA
Operating
LWAd
6.34 B
LpAm
44.4 dBA
Emissions
Classification (EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR
47, Pt 15; ICES-003; CNS13438; GB9254;
EN 61000-3-2; EN 61000-3-3; EN 60950-1;
IEC 60950-1
NOTE:
Product conformance to cited product specifications is based
on sample (type) testing, evaluation, or assessment. This product or
family of products is eligible to bear the appropriate compliance logos
and statements.
Power Supply
Input voltage
specifications
Rated input voltage
100 VAC to 240 VAC
Input Specifications
Rated input line
90 VAC to 264VAC
Frequency range
47 to 63 Hz
Rated input power
@ 115V input, Rated input power = 500W
(assume output wattage=400W
@ 230V input, Rated input power = 500W
(assume output wattage=400W)
Rated input current
6 A, 3 A (110 V, 220 V)
Steady state power
400W (rated)
BTU Rating
1710 BTU/hr
Ambient temperature
range
Operating
41° to 122° F (5° to 50° C)
Non-operating
-40° to 167° F (-40° to 75° C)
Relative humidity
(non-condensing)
Operating
5% to 95%
Non-operating
5% to 95%
Dielectric voltage
withstand
Input to output
2150 VDC minimum, withstand 1 min
Input to ground
2150 VDC minimum, withstand 1 min
Maximum Wet Bulb
Temperature
104° F (40° C)
QuickSpecs
HP ProLiant DL120 Generation 6
Technical Specifications
DA - 13504 Worldwide QuickSpecs — Version 3 — 12.18.2009
Page 29