HP (Hewlett-Packard) f2304 Flat Panel Television User Manual


 
User’s Guide 3–1
3
Setting Up the Monitor
The f2304 monitor connects to your computer through an
analog connector (VGA) or a digital (DVI) connector.
Some video cards support a higher resolution through an
analog (VGA) connection than through a digital (DVI)
connection.
The f2304 monitor supports resolutions up to 1920 x 1200
for both analog and digital connections. Please see the
documentation that came with your PC or video card for
details regarding the video resolution settings supported by
your equipment.
The DVI-D cable supplied with this monitor is for digital-
to-digital connection only. Your computer must have a
DVI-compatible graphics card installed for use with the DVI-D
signal cable. When connecting the DVI-D signal cable to the
DVI-I connector on the monitor, you must connect the other
end of the DVI-D cable to the DVI connector on the computer.
To set up the monitor, ensure that the power is turned off to
the monitor, computer system, and other attached devices,
then follow these steps:
1. Place the monitor in a convenient, well-ventilated
location near your computer.
Your f2304 monitor may have been shipped with the VGA
cable attached. This cable may be detached if you want to
use only a DVI cable instead.