Filter
Top Products
Operating the Monitor
User’s Guide 4–11
✎
Some DVD wide screen modes may provide formats other
than 16:9. When this occurs, black video borders may
remain visible above and below the displayed image when
Zoom On 2 is active.
5. When the desired zoom setting is highlighted, press the
Menu button to confirm the selection. The OSD returns to
the Image Control menu. Select the option to Cancel or
Save the new zoom setting.
6. Press the Menu button and select Exit to close the
Main Menu.
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat
panel screen to function like a standard monitor. Two
controls in the OSD can be adjusted to improve image
performance: Clock and Clock Phase. Use these controls
only when the auto adjust function does not provide a
satisfactory image.
✎
The Clock must first be set correctly since the Clock Phase
settings are dependent on the main Clock setting.
■ Clock — Increase/decrease the value to minimize any
vertical bars or stripes visible on the screen background.
■ Clock Phase — Increase/decrease the value to minimize
video distortion or video jitter.
✎
When using the controls, you will obtain the best results by
using the adjustment pattern provided on the CD-ROM.