HP (Hewlett-Packard) MR4000N TV Receiver User Manual


 
10 Using the HP HDTV Tuner
Installing or replacing the remote control batteries
When the remote control becomes less responsive or unresponsive, the batteries are low. Insert two
AAA non-rechargeable batteries into the remote control, and ensure that you match them to their
proper polarities.
1 Push down the tab and pull back the cover on the back of the remote control.
2 Insert the batteries into the remote control, and make sure that you match polarities.
3 Close the cover.
CAUTION: Use only the size and type of batteries specified.
Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
Do not mix different types of batteries together (e.g., alkaline and carbon-zinc) or old
batteries with fresh ones.
When not using the remote for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
Do not try to recharge batteries that are not intended to be recharged; they can
overheat and rupture. (Follow the battery manufacturer’s directions for the batteries
you are using.)
Al
w
ays remove batteries as soon as they become weak. Weak batteries can leak and
severely damage the unit.
Replace batteries when the remote control operation becomes erratic.
Do not take apart the batteries, heat them, or throw them into a fire.
Using the Electronic Program Guide (EPG)
Use the Electronic Program Guide (EPG) to view the listing of current and future programs. Press the
Guide button on your remote control to display the EPG. There are two different styles of the EPG:
Current Guide: Displays programs that are currently on air.
All Guide: Displays the same information as the Current Guide, plus a schedule of future programs.
For information on changing between Current Guide and All Guide, see “Electronic Program Guide
(EPG)” on page 21.