Filter
Top Products
AUDIO SYSTEM SETUP
24
AUDIO SYSTEM SETUP
Match the numbers below to the diagram for speaker placement and refer to the table
for the current surround sound requirements. (See page 56 for SURROUND functions.)
1 The television's internal speakers.
2 The television's internal center channel speaker, which is on only when the television
is in SURROUND DOLBY- mode.
3 These speakers are connected to a separate audio amplifier. Use the "AUDIO TO HI-
FI" output on the TV.
4 These speakers are connected to the Rear Speaker 8 Ohm output on the TV.
5 These speakers are controlled by a wireless speaker transmitter. Use the
"TRANSMITTER OUT" output on the TV.
6 This sub woofer is connected to the "SUB WOOFER" output on the TV.
Click to see Audio System Setup Illustration
* If optional left and right speakers are connected (3), the internal speakers (1) may be
turned off for better separation between the left, center, and right channels. The center
channel audio will be heard from (2).