Filter
Top Products
AUDIO SETTINGS
68
Use ADVANCED SETTINGS to improve the sound performance on the TV depending
on listening conditions.
PICTURE
Press CURSOR or to highlight a function.
Press CURSOR to change the function setting.
Press EXIT to quit menu or CURSOR to return to previous menu.
MTS MODE
(Multi-Channel Television Sound) will allow you to select STEREO (a stereo broadcast),
SAP (second audio program) which may be a secondary language, weather report, etc.
or MONO (monaural sound) used when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you
select will be displayed to the left of the channel number. See example below for each
selection when both stereo and second audio are received (monaural is always
received).
PERFECT VOLUME
This function will automatically adjust volume so each channel has the same average
volume level. (This function will be automatically set to off and cannot be turned on
when HOME THEATER-DOLBY mode is selected.)
AUTO NOISE CANCEL
This function eliminates the noise in between stations. If a channel is tuned and is noisy,
this function will automatically eliminate the audio for that channel.
DYNAMIC BASS
This function allows you to enjoy spectacular bass sound that would normally be heard
only with expensive home speaker systems.
LOUDNESS
This function will improve the quality of both low and high frequency sounds when
listening at low volume levels. (Enabling this function will automatically reset your
GRAPHIC EQUALIZER.)
INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use
only speakers from a separate stereo system.
NOTE: If the optional left and right speakers are connected while in HOME THEATER-
DOLBY NORMAL, the internal speakers may be turned off for better separation between
the left, center, and right channels. The center channel audio will still be heard from the