Hitachi 27UX01B CRT Television User Manual


 
Introduction
- 4 -
INTRO DUCTION
Your new television features all solid state components. It is designed to give you many years of enjoyment. It was
thoroughly tested and adjusted at the factory for best performance. In order for you to take full advantage of your new
television, please read and follow the installation and operating instructions contained in this manual.
Customer Record
The model and serial number of this product are located on the back of the TV. You should note the model and serial
number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event
of theft or loss.
Model
Number
Serial
Number
Care and Cleaning
Picture Tube (Turn TV Off)
Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS. Avoid excessive
moisture and wipe dry.
Plastic Cabinets
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth.
Avoid excessive moisture. Do not use benzene, thinner or other petroleum based products.
Remote Control
Wipe the cabinet with a soft cloth dampened with water or a mild detergent solution and wipe dry with a soft clean cloth. Do
not use benzene, thinner or other petroleum based products.
Television Location
This television is intended to be used with a stand or entertainment center. Consult your dealer for available options. Locate
for comfortable viewing. Avoid placing where sunlight or other bright lights (including reflections) will fall on the screen. Use
of some types of fluorescent lighting may reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from excessive heat or moisture. To
ensure optimum color purity do not position magnetic equipment (motors, fans, external speakers) nearby.
Optional External Equipment Connections
The Audio/Video connections between components can be made with shielded video and audio cables. For best
performance, video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic
supply house.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF
AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR
SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Polarized Plug
0348E3.fm Page 4 Tuesday, April 25, 2000 4:15 PM