Picture in Picture (PIP) Operation
- 8 -
PICTURE IN PICTURE (PIP) OPERATIO N
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the
same time with or without an external video source (VCR).
Without a VCR
Procedure
• Connect incoming cable to antenna (ANT) input on back of TV.
• Press the PIP button on the remote control to display the PIP frame.
• Choose channels for the
PIP
frame by pressing the remote control PIP CH buttons.
• Choose channels for the
Main Picture
by pressing the remote control CH buttons or by using the numeric
keypad.
Note:
The audio is from the Main Picture only.
With a VCR and Cable Box
Connect your television to a VCR and cable box, as shown.
Note:
The Remote Control must be programmed with supplied codes to operate the VCR and cable box. (See
“Programming the Remote” on page 16.)
Procedure
Press the PIP button on the remote control to display the PIP frame.
To view scrambled channels through your cable box in the PIP frame:
• Press the INPUT button on the remote control to select the video input to which your VCR is connected.
• Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3 or 4.
• Choose channels for the
PIP
frame by pressing the CABLE button on the remote control and using the
numeric keypad or CH buttons.
• Choose channels for the
Main Picture
by pressing the TV button on the remote control and using the numeric
keypad or CH buttons.
Note:
The audio is from the Main Picture only.
SWAP and RECALL Buttons
The SWAP button switches the PIP and the
main picture source. The RECALL button
shows the status of the onscreen PIP and
the main picture.
ANT
TO AUDIO
AMP
VIDEO
S-VIDEO
R
AUDIO
L
COMPONENT
VIDEO INPUT
P
R
Y/VIDEO
P
B
R
L
INPUT 1
R
AUDIO
L
INPUT 2
L
R
AUDIO OUT
VIDEO OUT
VCR
ANT INPUT
CABLES NOT SUPPLIED
OUTPUT
S-VIDEO OUT
ANT OUTPUT
ANT INPUT
Cable splitter
(Not supplied)
CABLE BOX
Incoming cable
TERMINALS ON BACK OF TV
Cable splitter not supplied
0348E3.fm Page 8 Tuesday, April 25, 2000 4:15 PM