Hitachi 32HDT50 Flat Panel Television User Manual


 
HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION
5
SPEAKER INSTALLATION 42”
1. Screw the speaker holder to the speakers as shown below.
2. Loosen 4 screws (A) (two on the left and two on the right).
3. Completely unscrew 4 screws (B) (two on the left and two on
the right).
4. Hook the speaker holders to the loosened screws (A).
5. Screw the speaker holders to the Display Monitor with
screws (B).
6. Tighten screws (A).
Speaker Holder
Speaker
Holder
Screw x2
Screw x2
(R)
(R) (L)
(R) Speaker
Loosen
Screw
(A)
Unscrew (B)
Completely
Bottom View
of Speaker
Holder
Hook this
portion to the
loose screws
(A).
Screw in
screws (B)
Insert
horizontally from
the side
7. Connect the speaker wires as shown below. (Make sure the
core is toward the display monitor side.)
NOTES: Do not connect speakers simultaneously to the speaker terminal of the Plasma TV and an external amplifier.
Core
FIRST TIME USE
Speaker Holder
Speaker Holder
Screw x2
Screw x2
(R)
(R) (L)
Screw in
screws (C)
Screw in
screws (D)
SPEAKER INSTALLATION 50”
1. Screw the speaker holder to the speakers as shown below.
2. Screw in screw (C).
3. Hook the upper speaker holder to the screw in (C).
4. Screw in the lower speaker holder (D).
5. Tighten screws (C) and (D).
6. Connect the speaker wires as shown below. (Make sure the
core is toward the display monitor side.)
Ferrite Core