Filter
Top Products
4
Accessories
First time use
Check to make sure you have the following accessories before disposing of the packing material.
CAUTION: 1. Ceiling mounting is not recommended. Mounting the panel on the ceiling does not
provide adequate ventilation for the electronics or proper support for the front glass
panel. This plasma television product is designed for a maximum tilting angle of 45
degrees from vertical.
2. This stand for use only with Hitachi 42HDS52 and 42HDS52A. Use with other
apparatus is capable of resulting in instability causing possible injury. See
important marking located on bottom of stand.
³ Remote Control Unit CLU-3852WL ´ Table Top Stand (P# QJ01831K).
(Part No. HL02066). ² Cleaning Cloth (P# MS00931).
· Two “AA” size, 1.5V batteries (P# FQ00021). ¶ Power Swivel Cable (P# EW08431).
» Power Cord (P# EV01841). º Ferrite Core (P# 2169513).
¿ Two IR Mouse cables (P# EY01641).
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1. Open the battery cover of the remote control by pushing down and
sliding the back cover off.
2. Insert two new “AA” size batteries for the remote control. When
replacing old batteries, push them towards the springs and lift them
out.
3. Match the batteries to the (+) and (-) marks in the battery
compartment.
4. Replace the cover.
CAUTION: Do not insert batteries with ‘+’ and ‘-’ polarities reversed as this may cause the batteries
to swell or rupture resulting in leakage.
» Power Cord
³ Remote Control
· Two “AA” size,
1.5V batteries
BOTTOM VIEW
(Remote Control)
Press down and slide back to remove.
¿ 2 IR Mouse Cable
² Cleaning Cloth
´ Table Top Stand
(42” models only)
º 1 Ferrite Core
(see page 13)
For U.S. models:
For optional
accessories, please
access our web site at:
www.hitachi.us/tv
¶ Power Swivel Cable
(42” models only)
Note: Please visit our
website for optional
accessories for the
55” models.