Filter
Top Products
64
Setup
On-Screen Display
12. Select the Test button VOL ̆ to check the response
of the device to this command.
13. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
14. Use the CURSOR PAD ̇ or ̈ to select the TV Input
that connects to the video and audio output of the
A/V Receiver.
15. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
16. Use the CURSOR PAD ̇ or ̈ to select the A/V
Receiver Source if you have connected the Monitor
Out and Optical Out to the A/V Receiver. Select “Not
Connected” if not used.
17. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next step.
18. If you would like to label your A/V Receiver Source,
use the CURSOR PAD ̇ or ̈ to highlight “Yes”, then
press the SELECT button to continue. Selecting
“No” will bypass the Source Labeling.
19. Use the CURSOR PAD ̆ or ̄ to select your A/V
Receiver Sources.
20. Use the CURSOR PAD ̇ or ̈ to label your A/V
Receiver Sources.
21. Use the CURSOR PAD ̇, ̈, ̆ and ̄ to highlight
NEXT, then press the SELECT button to move on to
the next SETUP screen.
IR Code Set
Monitor Out Not Connected
Optical Out Not Connected
Monitor out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please selcet
an A/V Receiver Source.
Other
TV Input Not Connected
Brand Name Other
AV Net Setup Wizard : A/V Receiver Setup
Move
Change Input
Back Next
SEL
Select
IR Code Set
Monitor Out Not Connected
Other
Brand Name Other
TV Input Not Connected
AV Net Setup Wizard : A/V Receiver Setup
Move
Optical Out
Would you like to relabel the Source buttons?
Not Connected
YesNoBack
SEL
Select
Source Settings
Source Name
Source 1
Source 2
Source 3
Source 4
Source 5
Source 6
Source 7
Source 8
Source 9
Source 10
Satellite
----------
----------
----------
----------
----------
----------
----------
----------
----------
AV Net Setup Wizard : A/V Receiver Setup
Move
SEL
Select
Back Next
Change Name
Select the Test button. If device
responds to this command, proceed to
“Next”. Otherwise, try another IR
Code Set number.
IR Code Set
Test Button
Other
Brand Name Other
AV Net Setup Wizard : A/V Receiver Setup
Move
IR Out
Back
Learning Mode
Next
POWER SOURCE 1 VOL ̆
SEL
IR Code Set
TV Input Not Connected
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
Other
Brand Name Other
AV Net Setup Wizard : A/V Receiver Setup
Move
Change Input
Back Next
SEL
Select