Filter
Top Products
32
The Remote Control
Your HITACHI Plasma TV incorporates Two Tuner
technology designed for improved viewing enjoyment.
This Two Tuner feature allows you to view antenna
inputs on both the main picture and sub picture
simultaneously, with separate tuning control for each.
When a Digital channel is viewed in the main picture,
the Digital channel can not be viewed in the sub
picture. And when the Analog channel input is viewed
in the main picture, the Analog channel input can not
be viewed in the sub picture.
The CABLE and AIR input cannot be viewed in PIP
mode at the same time. To select between main
picture and PIP sub picture tuning, use the CURSOR
PAD button on the remote. The Green highlighted
channel display will move with every press of the
CURSOR PAD buttons.
The Picture-in-Picture feature is convenient when you
want to watch more than one program at the same
time. You can watch a TV program while viewing other
programs from any of the video inputs.
Use connection shown at the right to view VCR
program as a sub-picture while viewing another
program as main picture (CABLE or AIR).
When installing a CableCARD, connect your coaxial
cable to CABLE (see page 12). AIR will not be available
while using a CableCARD.
ቢ PIP button
Press the PIP button and a sub-picture will appear
in one of the four different modes (POP, PIP, SPLIT
or SURF), depending on the INPUT signal. To
change the PIP mode, use the PIP button to cycle
through the four different modes.
POP MODE PICTURE-IN-PICTURE
POP Mode PIP displays the sub-picture outside of
the main picture. Use the CURSOR PAD (̆ or ̄)
to move the sub-picture. This feature is not
available with a 1080i
signal. Please refer to
the
PICTURE-IN-PICTURE
MODES Table (see page
33).
NOTES: 1. PIP MODE Picture-in-Picture is only
available with a 1080i signal.
2. Press the CURSOR PAD (̇ or ̈) to
enable the sub-picture sound.
3. Sub-picture channel availability
depends on the channel list.
Picture-in-Picture (PIP)
Main Picture
Sub Picture
ቢ
ባ
G-LINK
/
VIDEO OUT
AUDIO OUT
VCR
Back of VCR
Connect the
Cable and/or
Air cables