Filter
Top Products
On-Screen Display
70
TV Guide On Screen
IR DEFAULTS
IR Defaults lets you modify the channel dialing defaults
if your cable box and/or VCR is not changing channels
properly.
1. From the SETUP screen, use the CURSOR PAD ̄
to highlight Change Default Options and then press
the SELECT button.
2. Use the CURSOR PAD ̆ or ̄ to highlight IR
defaults and then press the MENU button to
access the IR Defaults Panel Menu.
3. Enter the chosen information in the Panel Menu
fields.
• Cable box – if you have a cable box, indicates
whether or not you want to modify the default
channel dialing options.
Choices are Yes and No (default).
• Dial mode – select whether you must enter 2-
digit or 3-digit (default) channel numbers to
change channels on your cable box.
• Enter key – indicate if you currently press the
Enter key after you enter a channel number
with your cable box remote.
Choices are Yes and No (default).
• VCR – if you have a VCR, indicates whether or
not you want to modify the default channel
dialing options.
Choices are Yes and No (default).
• Dial mode – select whether you must enter 2-
digit (default) or 3-digit channel numbers to
change channels on your VCR.
• Enter key – indicate if you currently press the
Enter key after you enter a channel number
with your VCR remote.
Choices are Yes and No (default).
4. Press the SELECT button to highlight Done, and
then press the SELECT button to exit the menu or
use the CURSOR PAD ̄ to highlight Cancel. Then
press the SELECT button to exit the menu.