Filter
Top Products
21
THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different
types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with
one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote control at the screen of the TV and press the TV button. The TV button will blink, indicat-
ing that the remote will now control your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The VCR button will blink,
indicating that the remote will now control your VCR (see page 30 for instructions on how to program the remote to control your
VCR).
To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE (CBL) button. The CBL
button will blink, indicating that the remote will now control your cable box (see page 31 for instructions on how to program the
remote to control your cable box).
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and press the SET-TOP-
BOX (STB) button. The STB button will blink, indicating that the remote will now control your set-top-box. If you have a satellite
receiver, use this button to program your satellite receiver (see page 32 for instructions on how to program the remote to con-
trol your set-top-box).
To operate your AUXILIARY (AUX) player, point the remote at the remote sensor of the AUX player and press the AUX button.
The AUX button will blink, indicating that the remote will now control your AUX player (see page 33 for instruction on how to pro-
gram the remote to control your AUX player).
To operate your PVR (Personal Video Recorder), point the remote at the remote sensor of the PVR and press the PVR button.
The PVR button will blink, indicating that the remote will now control your PVR (see page 34 for instruction on how to program
the remote to control your PVR).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and press
the CD or AMP button. This button will blink, indicating that the remote will now control the desired component (see page 35 for
instructions on how to program the remote to control additional Audio/Video equipment).
ቢ These buttons allow the remote to control your TV, VCR,
cable box, satellite receiver, DVD player, or other
Audio/Video equipment depending on which mode is
chosen, as explained above.
ባ,ቤ LIGHT BUTTON
When you are in a dark room, press the light button ባ
on the remote to light up the buttons shown in ቤ and the
source button will blink. The light will stay on for about 8
seconds if the light button is not pressed again. These
buttons will not appear to light if the room is too bright.
ቢ
ባ
ቤ
ቤ
ቤ
POWER
TV
VCR
CBL
AUX
1
2
4
56
3
7
89
0
INFO
SLEEP
10+
DVD
EXIT
MENU
CHVOL
MUTE
SOURCE WIZARD
REC
SELECT
vIRTUAL HD
ASPECT
STB
ANT
LAST CH
VID 1
V
ID
2
VID 3
V
ID
4
VID 5
PVR
CD
AMP
C.C.
SUB TITLE
NAVI DISC MENU ADVANCED
ZOOM
DAY/NIGHT
PIP SURF FRZ
MODE
SWAP