Filter
Top Products
33
USING THE REMOTE TO CONTROL OTHER
AUXILIARY (AUX) EQUIPMENT
Operating the precoded function for your AUXILIARY (AUX) equipment.
This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your AUX equipment (refer to page 36 for pre-codes).
1. Turn ON your auxiliary equipment you wish to control with the remote.
2. Aim the remote control at the front of your Auxiliary equipment.
3. Press and release the AUX button to switch to AUX pre-coded mode.
4. Hold down the AUX button on the remote and enter the two digit preset code that matches your Auxiliary equipment, as shown on
page 36. The indicator light will flash 3 times if the code was accepted.
5. Aim the remote at the Auxiliary equipment and press the POWER button. The remote will turn off your Auxiliary equipment when
the correct two digit preset code is entered. When this occurs, the remote control is programmed for your Auxiliary equipment. If
the Auxiliary equipment does not turn off, try a different two digit preset code.
6. The remote will now control your Auxiliary equipment.
7. You will need to set the display type of your Auxiliary equipment to 16:9 widescreen.
NOTES:
1. If your Auxiliary equipment cannot be operated after
performing the above procedures, your Auxiliary
equipment’s code has not been precoded into the remote.
2. In the unlikely event that your Auxiliary equipment cannot
be operated after performing the above procedures,
please consult your Auxiliary equipment operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
ቢ AUX Button
This button allows the remote to control your Auxiliary equip-
ment by setting it to AUX mode.
ባ PRECODED AUX Buttons
These buttons transmit the chosen precoded Auxiliary
codes.
ቤ EXCLUSIVE TV Buttons (except number buttons)
These buttons are for operating the TV. The number buttons
can also be used to operate your Auxiliary equipment.
ቢ
ባ
ቤ
ባ
ቤ
POWER
TV
VCR
CBL
AUX
1
2
4
56
3
7
89
0
INFOSLEEP
DVD
EXIT
MENU
CHVOL
MUTE
SOURCE WIZARD
REC
SELECT
VIRTUAL HD
ASPECT
STB
ANT
LAST CH
VID 1
VID 2
VID 3
VID 4
VID 5
PVR
CD
AMP
C.C.
NAVI DISC MENU ADVANCED
ZOOM
DAY/NIGHT
PIP SURF FRZ
MODE
SWAP
SUB TITLE
ቤ
MY AUXILIARY
EQUIPMENT CODE IS:
NOTE: Refer to instruction manual of the Auxiliary equipment for operation of the buttons exclusively for the Auxiliary equipment.