Filter
Top Products
ቨ SPEAKER MATRIX SURROUND Switch
Use this switch to choose between the surround and external speaker features. See page 17 for AUDIO SYSTEM SETUP.
The TV s Internal Speakers will be switched off when EXT. is selected.
ቩ REAR SPEAKER Terminals
These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is
controlled by the remote control main volume buttons. Use speakers with 8 Ohm impedance only.
FIRST TIME USE
10
ቢ ANTENNA INPUT
Use an F type coaxial cable to connect an antenna or cable TV (CATV) output to this rear panel jack.
ባ AUDIO/VIDEO INPUTS 1, 2
The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video
inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players etc. (If you have mono sound, insert
the audio cable into the left audio jack.)
NOTE:
DO NOT connect standard VIDEO or S-VIDEO to INPUT 2 when using Y-C
B
C
R
input.
When using the Y-C
B
C
R
input jacks, connect your components audio output to the TV s INPUT 2 Left and Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s C
B
input and
the components R-Y output to the TV s C
R
input.
It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-C
B
C
R
inputs. (see
pages 47 and 48)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-C
B
C
R
jacks.
When using the Y-C
B
C
R
jacks, INPUT 2 will be viewed as a blank PIP sub-picture. (see page 22)
NOTE: You may use VIDEO, S-VIDEO, or COMPONENT VIDEO: Y-C
B
C
R
inputs to connect to INPUT 2, but note that only one
of these may be used at a time.
ቤ MONITOR OUT
These jacks provide fixed audio and video signals which are used for recording.
ብ AUDIO TO HI-FI
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be
controlled by the television s main volume.
ቦ S-VIDEO INPUTS 1 and 2
INPUTS 1 and 2 provides S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO output capability.
ቧ COMPONENT VIDEO: Y-C
B
C
R
INPUT 2
INPUT 2 provides Y-C
B
C
R
jacks for connecting equipment with this capability, such as a DVD player.
RL
REAR SPEAKER
8
⏲
ONLY
ቩ
ቨ
ቢ
ባ
ቤ
ብ
ቧ
ቦ
MONITOR
OUT
AUDIO
TO HI-FI
INPUT 2
INPUT 1
AUDIO
(MONO)
L
R
AUDIO
(MONO)
L
R
AUDIO
L
R
S-VIDEO
VIDEO
VIDEO
VIDEO
VHF/UHF
L
R
COMPONENT VIDEO
Y C C
S-VIDEO
BR
STOP
CONNECT ONLY 8 OHM SPEAKERS
DO NOT SHORT CIRCUIT
THESE TERMINALS.
(Such damage is NOT COVERED
by your television warranty)
SP. MATRIX
SURROUND
EXT.