Filter
Top Products
THE GENIUS REMOTE CONTROL (CLU-436UI)
18
ቢ,ቤ
ቦ
ብ
ባ
ቤ
CLU-436UI
POWER
TV CABLE VCR
HELP
PIP CH
TV/VCR
PIP SWAP MOVE
FRZ
REC
STOP
PAUSE
LST-CH
EXIT
RECALL
MUTE
CH
VOL
123
456
789
0
MENU
SLEEPINPUT
LIGHT
In addition to controlling all the functions on your HITACHI Color TV, the new remote control is designed to operate different types
of VCRs, CATV (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now con-
trol your television.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The remote will now control
your VCR. (See page 25 for instructions on how to program the remote to control your VCR.)
To operate your cable/satellite box, point the remote at the remote sensor of the cable/satellite box and press the CABLE button.
The remote will now control your cable/satellite box. (See page 26 for instructions on how to program the remote to your
cable/satellite box.)
ቢ These buttons allow the remote to control your TV, VCR,
or cable/satellite box depending on which mode is
chosen, as explained above.
ባ,ቤ LIGHT BUTTON
When you are in a dark room, press the light button ባ
on the side of the remote to light up the buttons shown in
ቤ. The light will stay on for about 8 seconds if the light
button is not pressed again. These buttons will not
appear to light if the room is too bright.
ብ PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded
VCR codes.
ቦ TV/VCR BUTTON
When the remote is in the TV or VCR mode, this is the
TV/VCR button. When the remote is in the CABLE
mode, this is the A/B button.