Filter
Top Products
AUDIO SYSTEM SET-UP - 15 -
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laser discs, VCR's, etc., that have this
feature. Use this connection in place of the standard video connection if your device has this
feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the
TV.
Refer to the operating guide of your other electronic equipment for additional information on
connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own
video or line output (INPUT: 1 in the example on p. 11). Refer to your VCR operating guide for
more information on "line" input-output connections.
AUDIO SYSTEM SET-UP
Match the numbers below to the diagram for speaker placement and refer to the table for the
different surround sound requirements.
The television's internal speakers.
These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" output
on the TV.
These speakers are connected to the Rear Speaker 8 Ohm output on the TV.
(Click to see Audio System Set-Up)
* See page 10 for location of Surround Switch.
THE REMOTE CONTROL (CLU-415UI)
In addition to controlling all the functions on your HITACHI Projection TV, the new remote is
designed to operate different types of VCR's and different types of CATV (Cable TV) converters
with one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote at the remote sensor of the TV, and press the TV button on
the remote. The remote will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR, and press the VCR
button. The remote will now control your VCR.
To operate your Cable Box, point the remote at the remote sensor of the Cable Box, and press the