Filter
Top Products
HITACHI SERVICE HOTLINE - 40 -
NOTE: Due to improvements, specifications in this operating guide are subject to change without
notice.
HITACHI SERVICE HOTLINE
To locate an authorized HITACHI service facility in the continental U.S.A.
DIAL TOLL FREE
7 days a week, 24 hours a day
800 HITACHI
1-800-448-2244
Hitachi Home Electronics (America), Inc.
Hitachi has made every effort to assure you hours of trouble free operation from your unit.
However, should you require service, a network of Hitachi Authorized Service Facilities has
been established in all 50 states and Puerto Rico. Each facility will provide you with convenient
and expedient assistance. Our service "Hotline" operator will direct you to the Hitachi
Authorized Service Facility nearest you. Just present proof of purchase and/or delivery receipts
to the Hitachi Authorized Service Facility, and service will be rendered in accordance with the
terms of the limited warranty as stated on your warranty card or operating guide.
Should you have any questions regarding in-warranty service, operation or technical
assistance, please contact:
Hitachi Home Electronics (America), Inc
3890 Steve Reynolds Blvd
Norcross, GA 30093
Tel: 404-279-5600
Hitachi Sales Corporation of Hawaii
3219 Koapaka St.
Honolulu, HI 96819
Tel: 808-836-3621
i
Callers will normally have the problem of erasing a labeled channel. Everytime they select "Channel
Caption" to delete a label, a message appears explaining that the memory is full. This means the
channel they are currently tuned to is not labeled, therefore cannot not be canceled. The set assumes
they want to label this channel. Ask the caller to tune to a channel that is labeled then select "Channel
Caption" to cancel the labeling.
ii
You can always either lock or unlock any one of the four channels using code "777", regardless of
what the key number actually is. Code "777" will always lock or unlock each station.
iii
This is not printed in the manual, but should be done when finished.
iv
Here's how the automatic message really works:
Once the message is entered in, everytime the set is turned on the message will appear on the tv screen.
To remove the message the user simply needs to adjust the volume or change channels. This procedure
cannot be overidden. If the tv is on at the specified setting time the message will reappear. This design
ensures the person the message was intended for gets the message even if the individual was not
watching television at the specified setting time.