Filter
Top Products
THE REMOTE CONTROL (CLU-415UI) - 17 -
S
SS
S MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
T
TT
T CHANNEL SELECTOR buttons
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc.
Enter two or three numbers to select channels. Enter "0" first for channels 1 to 9. For channel
100 and higher, press the "1" button, wait until another dash appears next to the channel display
on your TV, then enter the remaining two numbers using the numbered buttons.
Channel selection may also be performed by pressing channel up ( ) or down ( ).
NOTE: The TV may not receive some channels if you are not in the correct AIR/CABLE mode.
(See page 25)
U
UU
U AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the two sets of
video input jacks each time the button is pressed. If the Picture-in-Picture (PIP) is on, the AVX
will select between the two sets of video input jacks. (See page 18)
V
VV
V VOLUME, MUTE buttons
Press the "VOLUME" up ( ) or down ( ) button until you obtain the desired sound level.
To turn the sound off instantly to answer the telephone, etc., press the "MUTE" button. Press the
"MUTE" button again or press the "VOLUME" up (
) button to restore the sound.
The word "MUTE" will remain displayed if the CLOSED CAPTION feature is turned off.
CLOSED CAPTION will also be displayed when the "MUTE" button is pressed. (Certain
models only.)