Filter
Top Products
USING THE REMOTE TO CONTROL VCR FUNCTIONS - 20 -
T
TT
T FREEZE (FRZ) BUTTON
If you wish to freeze the sub-picture, press the "FRZ" button. This is convenient when trying to
write down the address for a mail order company, recording statistics for a sporting event, etc.
To return to motion, press the button again.
U
UU
U FREEZE (FRZ) BUTTON WITHOUT A SUB-PICTURE (QUICK
FREEZE)
Press this button without a sub-picture to freeze the picture you are currently viewing. Press this
button again to return to normal viewing. The SWAP button will not work with this QUICK
FREEZE function.
CAUTION: A pattern burn may develop of the sub-picture is left in the same corner
permanently. If the PIP feature is used frequently, occasionally shift the sub-picture to a different
corner.
NOTE: Only sound from the main picture can be heard.
USING THE REMOTE TO CONTROL VCR FUNCTIONS
Operating the precoded function for your VCR
This remote is designed to operate different types of VCRs. You must first program the remote
to match the remote system in your VCR. (Refer to page 22).
1. Turn ON your VCR.
2. Aim the remote control at the front of your VCR.
3. While holding down the VCR button on the remote, enter the 2 digit preset code that matches
your VCR as shown on page 22. The remote will turn off your VCR when the correct 2 digit
preset code is entered. When this occurs, the remote control is programmed for your VCR. If
the VCR does not turn off after 5 seconds, try a different 2 digit preset code.
4. The remote will now control your VCR.