Hitachi 50SX7P Projection Television User Manual


 
REAR PANEL CONNECTIONS - 16 -
 Audio/Video Inputs 1, 2
The "AVX" (Auxiliary Video) button will step through each video source and the current
antenna input each time it is pressed. Use the audio and video inputs to connect
external devices, such as VCRs, camcorders, laser disc players, etc. (If you have mono
sound, insert the audio cable into the left channel jack.)
 Monitor Out
These jacks provide fixed audio and video signals which are used for recording.
 Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With
this connection, the audio to the stereo can be controlled by the television's remote
control. Use these jacks for the SURROUND Left and Right channels. (See page 15)
 Transmitter Out
These jacks provide variable audio output to a set of wireless speakers. They can also
be used for another stereo system amplifier. With this connection, the audio can be
controlled by the television's remote control.
 Rear Speaker Terminals
These terminals are used to connect external speakers, which are used for the surround
sound feature. The volume level is controlled by the remote control main volume
buttons and also by an independent rear volume feature found in the "sound" function
menu. Use speakers with 8 Ohm impedance only.
 S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video
output capability.
REAR PANEL CONNECTIONS
Typical full-feature set-up. Follow connections that pertain to your personal entertainment
system.