Hitachi 50SX7P Projection Television User Manual


 
HOW TO USE THE REMOTE TO CONTROL YOUR TV - 21 -
Click to see the Remote.
 ANT button
Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary)
antenna inputs.
NOTE: When VHF/UHF is selected, the channel number in the upper right corner of the
screen is green. When the AUX input is selected, the channel number is in yellow.
 MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The "MENU" button will start or exit the on-screen display.
The "CURSOR" buttons will highlight functions or adjust different features.
The "ENTER" button will set features to your preference.
 CHANNEL SELECTOR buttons
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc..
Channel selection may also be performed by pressing channel up ( ) or down ( ).
NOTE: The TV may not receive some channels if you are not in the correct AIR/CABLE
mode. (See page 29)
 AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the three
sets of video input jacks each time the button is pressed. If the Picture-in-Picture (PIP)
is on, the AVX will select between the three sets of video input jacks. (See page 21)