Hitachi 50SX7P Projection Television User Manual


 
HOW TO USE THE REMOTE TO CONTROL YOUR TV - 19 -
and Audio equipment with one touch. Basic operation keys are grouped together in one
area. All other controls are separated from them and arranged in MULTI-PAGE
sections, with a display that can be switched to cover any of three pages. Functions are
arranged and properly categorized into windows, making operation simple when
multiple functions are to be controlled.
To operate your TV, point the remote at the remote sensor of the TV and press the TV
POWER button.
To operate your VCR, point the remote at the remote sensor of the VCR. Slide the
MULTI-PAGE select switch to VCR and press the VCR POWER button to turn on the
VCR power. The remote will now control your VCR. (See page 23 for instructions on
how to program the remote to control your VCR.)
To operate your Cable Box, point the remote at the remote sensor of the Cable Box.
Slide the MULTI-PAGE select switch to TV/CABLE and press the CABLE POWER
button to turn on the cable box power. The remote will now control your Cable Box.
(See page 24 for instructions on how to program the remote to control your Cable Box.)
To operate your Audio Equipment, point the remote at the remote sensor of the audio
component you would like to operate. Slide the MULTI-PAGE select switch to AUDIO
and press the button which corresponds to the component you would like to control
(AMP, CD, or TAPE). Press the AUDIO POWER button to turn on the audio component
power. The remote will now control your audio equipment. (See page 25 for instructions
on how to program the remote to control your audio equipment.)
Click to see the Remote
 MULTI-PAGE select switch
This selects the button layout of the multi-page section of the remote control.
 MULTI-PAGE buttons
These buttons change functions as shown on page 17.
, LIGHT BUTTON
When you are in a dark room, press this button on the side of the remote to light up the
buttons shown in . The light will stay on for about 8 seconds if the light button is not
pressed again. These buttons will not appear to light if the room is too bright.
HOW TO USE THE REMOTE TO CONTROL YOUR TV