Hitachi 57F710S Projection Television User Manual


 
30
THE REMOTE CONTROL
USING THE REMOTE TO CONTROL
SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS
Operating the precoded function for your set-top-box/satellite receiver.
This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the
remote system of your set-top-box/satellite systems (refer below for pre-codes).
1. Turn ON your set-top-box/satellite systems.
2. Aim the remote control at the front of your set-top-box/satellite systems.
3. To switch to set-top-box/satellite (STB) pre-coded mode, press and release the SAT button.
4. Hold down the SAT button on the remote and enter the two digit preset code that matches your set-top-box/satellite receiver, as
sho
wn below. Release the SAT button.
5. Aim the remote at the set-top-box/satellite receiver and press the
POWER button. The remote will turn off your set-top-box/satel-
lite receiver when the correct two digit preset code is entered.
When this occurs, the remote control is programmed for your
set-top-box/satellite receiver. If the set-top-box/satellite receiver
does not turn off, try a different two digit preset code.
6. The remote will now control your set-top-box/satellite receiver.
NOTES:
1. If your set-top-box/satellite receiver cannot be operated
after performing the above procedures, your set-top-
box/satellite receiver code has not been precoded into the
remote.
2. In the unlikely event that your set-top-box/satellite
receiver cannot be operated after performing the above
procedures, please consult your set-top-box/satellite
receiver operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
SA
T (Set-Top-Box/Satellite) button
This button allows the remote to control your set-top-
box/satellite receiver by setting it to SET-TOP-BOX/SATEL-
LITE mode.
PRE-CODED SET-TOP-BOX/SATELLITE RECEIVER
b
uttons
These buttons transmit the chosen pre-coded set-top-
box/satellite codes.
EXCLUSIVE TV buttons
These buttons are for operating the TV.
MY SATELLITE RECEIVER/STB CODE IS:
NOTE: Refer to instruction manual of the set-top-box/satellite receiver for operation of the buttons exclusively for the set-top-
box/satellite receiver.
SET
T
OP BO
X BRAND . . . . . . . . . . .CODES
PANASONIC . . . . . . . . . . . . . . . . . . . . . . . .05
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
SAMSUNG . . . . . . . . . . . . . . . . . . . . . . . . . .07
ZENITH
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
08
SA
TELLITE BRAND
. . . . . . . . . . . . . .
CODES
ECOSTAR . . . . . . . . . . . . . . . . . . . . . . . . . .03
HITACHI . . . . . . . . . . . . . . . . . . . . . . . . . . . 00
HUGHES . . . . . . . . . . . . . . . . . . . . . . . . . . .04
RCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
01
SONY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02