Filter
Top Products
76
65” DISASSEMBLY/ASSEMBLY INSTRUCTIONS
2 - RE-ASSEMBLY PROCEDURE
STEP 7
To re-assemble the set, lift the top portion and align onto the
bottom cabinet. Gently lower the top portion until it sits flush
on the bottom.
STEP 8
Re-install the joint connector bolts (4 pcs.) that were removed
in step 4 of the disassembly.
STEP 9
Re-install the top (4) four screws into the lower rear cover, see (a).
(a)
STEP 10
Re-connect the sensor connector to the sensor board, see (a). Re-install the sensor box, see (b).
(a)
(b)
STEP 11
Re-install the 8 screws that hold the frame to the cabinet on the front side of the TV.
STEP 12
Re-install both of the front decoration panels, see (a) and (b) Re-install the speaker grille, aligning it with the bottom cabinet, see (c). This com-
pletes the Disassembly and Assembly instructions.
(a)
(b)
(c)