Filter
Top Products
57” DISASSEMBLY/ASSEMBLY INSTRUCTIONS
73
2 - RE-ASSEMBLY PROCEDURE
STEP 8
To re-assemble the set, lift the top portion and align onto the
bottom cabinet. Gently lower the top portion until it sits flush
on the bottom.
STEP 9
Re-install the joint connector bolts (4 pcs.) that were removed
in step 5 of the disassembly.
STEP 10
Re-install the top (4) four screws into the lower rear cover, see (a). Re-install the (4) four side screws that hold the back cover to the cabinet, see
(b).
(a)
(b)
STEP 11
Re-connect the sensor connector to the sensor board, see (a). Re-install the sensor box, see (b).
(a)
(b)
STEP 12
STEP 13
STEP 14
Re-install both of the front decoration panels, see (a) and (b). Re-install the speaker grille, aligning it with the bottom cabinet, see (c). This com-
pletes the Disassembly and Assembly instructions.
(a)
(b)
(c)
Please re-install 3 screws
(
ቢ,ባ,ቤ) below screen
frame that hold the back
cover to the cabinet as
the arrows shows.
Please re-install 3 screws
(
ቢ,ባ,ቤ) below screen
frame that hold the back
cover to the cabinet as the
arrows shows.
(a) Left Side
(b) Right Side
Re-install 4 screws (ቢ,ባ,ቤ,ብ) that hold the screen frame
to the cabinet on the Right side
, see (a) and (b).
Repeat to
re-install 4 scre
ws on the Left side
.
(a)
ብቤ ባ ቢ
ቢባቤ
ቤ ባ ቢ
ብ
(b)