THE GENIUS REMOTE CONTROL (CLU-572TSI)
33
(1)These buttons allow the remote to control your TV, VCR, cable
box, satellite receiver, DVD player, or other Audio/Video equipment
depending on which mode is chosen, as explained above.
(2), (3) LIGHT BUTTON
When you are in a dark room, press the light button (2) on the side
of the remote to light up the buttons shown in (3) . The light will
stay on for about 8 seconds if the light button is not pressed again.
These buttons will not appear to light if the room is too bright.
(1) POWER Button
Press this button to turn the TV set on or off when the remote is in TV mode. (See page 22 for instructions on
how to set the remote control to TV mode.)
(2) TV button
When the TV button is pressed, it will blink, to indicate the remote is in TV mode.
(3) VCR button
When the VCR button is pressed, it will blink to indicate the remote is in VCR mode. (See page 32)
(4) CABLE (CBL)
When the CABLE button is pressed, it will blink to indicate the remote is in CABLE mode. (See page 33)
(5) SATELLITE (SAT)
When the SAT button is pressed, it will blink, to indicate the remote is in SATELLITE mode. (See page 34)