Filter
Top Products
SET UP
65
Press THUMB STICK
or to highlight then press down on THUMB STICK to select Color System (HDTV,
SDTV/DVD)
Press EXIT to quit menu or THUMB STICK
to return to previous menu.
NOTE: Set up a Component Signal (connect component to Y-PB-PR inputs) and switch to VIDEO: 1 or 2 by
pressing the INPUT button on the Remote Control when planning to use the component set function.
COLOR SYSTEM
The COLOR SYSTEM function allows you to automatically change tint and color coordinate for DTV
Programs.
HDTV - High Definition Television - Use for High Vision Signal Y-PB-PR from HDTV Set-Top
Box.
SDTV /DVD - Standard Definition Television or Digital Video Disc Y-CB-CR such as DVD (Digital
Video Disc Player).
NOTE:
1 . If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will
be abnormal.
2. You must be tuned to VIDEO: 1 or 2 input and have a component hooked up to the Y-PB-PR input jacks to
access this COMPONENT SET menu.
3. All settings will affect only the component input you are currently viewing. If you are using both sets of
component input jacks, be sure to set the COMPONENT SET feature for both inputs (set COMPONENT 1 AND
COMPONENT 2).