Filter
Top Products
40
BRIDGE MEDIA FUNCTION
2) PLAY MOTION PICTURE
When enjoying motion picture, you can press RECALL button to display the information and control menu on
the bottom side of the screen. The control menu indicates as shown below.
No. 1/4˖ There are four motion pictures in total, this is the first one.
05/05/28˖ May 28, 2005
Press the
ŸźŻŹ cursor buttons to select the function symbol on screen display, and then press the ENTER
button to control the motion picture. For example, if you want to pause the motion picture, press the ŸźŻŹ
cursor buttons to select the symbol, and it will show in green, indicating it is selected. Then press the
ENTER button, the color of this symbol changes green to yellow, the motion picture will be paused.
*1) When the symbol is selected, press the ENTER button to play the motion picture from the beginning
itself. When the symbol is shown in yellow, press the ENTER button once more to play the last motion
picture.
Remarks
˖
˄1˅In bridge media mode, the characters
ʽ
No Connection will appear on the screen if the connected
equipment is unplugged or not connected properly.
In TV mode, the characters
ʽ
No Connection will appear on the screen when you press the TV/ PHOTO
button if the equipment is not connected.
˄2˅In bridge media mode, the optional picture modes are Favorite(Photo) and Dynamic(Photo) only.
˄3˅In photo display mode, the TV will exit from the photo mode automatically when you enter the Timer,
Setup or Function menu. In motion picture mode, the TV will exit from the motion picture mode
automatically when you enter the Timer, Setup or Function menu.
˄4˅With the photo display mode or the motion picture playing being over, the TV will automatically reduce the
contrast and color setting value of the picture displayed if there is not operation for more than three
minutes. This may prevent damaging the PRT.
˄5˅In bridge media mode, multi picture, channel surf, freeze and aspect mode functions are not available.
˄6˅The TV can display maximum 500 photos or motion pictures.
˄7˅When the bridge media status indicator is flickering, it indicates that TV is accessing the data in memory
card. At this time, do not turn off the TV or cut off the connection, otherwise the data in memory card may
be damaged.
Explanations
˖
˄1˅The TV can display digital pictures from digital cameras which meet DCF Standard or the motion pictures
whose format is Motion JPEG, PhotoJPEG, MPEG1 or MPEG4 (Supported audio formats of motion
pictures are PCM, ADPCM and MPEG1-Layer2.). Files that were copied or edited on a computer may not
be displayed on the TV screen.
˄2˅Supported JPEG image sizes are up to 8176h8176. JPEG format should conform with DCF standard.
˄3˅The USB slot on the TV can only connect to digital camera or card reader whose current consumption must
be less than 500mA.
˄4˅The USB slot on the TV cannot connect the camera or card reader with USB hub.
˄5˅When all-in-one card reader is used, please insert one memory card at a time.
˄6˅Not all digital camera or card reader or SD card or MMC card is compatible with the TV. Similarly,
compatibility exists in the memory card and digital camera or card reader.
˄7˅Do not use the USB slot and the SD memory card slot at one time.
˄8˅The TV can only display photos and motion pictures (include audio) in the digital camera, the audio that was
recorded by the digital camera or appended to a photo cannot be played on the TV.
˄9˅Supported motion pictures of MPEG4 are up to 352h288, and motion pictures of Motion JPEG, PhotoJPEG
and MPEG1 are up to 640h480. When the motion picture is played, it may drop frames. This is normal.
Symbol Function Symbol Function
Fast backward Zoom
Fast forward Play
*1) Pause
Skip forward Volume up
Stop Volume down
Slow play