Hitachi C47-WD8000 Projection Television User Manual


 
48
AV NET
8.The word “Succeeded” will be displayed on the lower
left corner of the screen if the code is learnt. The frame
of the item will be in yellow, indicating this item has
been registered.
The word “Failed” will be displayed on the lower left
corner of the screen if the TV fails to learn the code.
Please make sure that your operations are correct and
re-do according to the above steps.
The Not Available will be displayed on the lower left
corner of the screen if the TV is lack of enough internal
memory’s capacities. Please refer to the note (2) to clear
the items which are seldom used in order to release the
internal memory’s capacities.
9.In order to check the AV NET function works properly, a test must be taken on the item after the learning
succeeds. Press the ENTER button and the item will be displayed in yellow for about one second, the
infrared signal will be output by the IR mouse. At this moment, the power of the DVD player should have
corresponding action. If not, please check the connection and repeat the learning procedures.
10.If you want to learn the other keys of the DVD player. Please refer to the above steps and operate according to
the hints on the screen.
11.You can control the DVD player by using the remote control unit of the TV after learning the related keys.
Usage: Press the AV NET button to enter the AV NET mode. Press the Ÿź cursor buttons to select DVD2
and then refer to
Ǐ
Using the AV NET function
ǐ
for more information.
Notes:
(1) The set can only learn and record remote codes of one of the external equipment. For example, you learn the codes of VCR2
after finishing learning the codes of DVD2, the set will record the codes of VCR2 only.
(2) Please select the learned items in order to clear their codes by pressing the CH
ĉ
/
Ċ
button to release the occupied internal
memory’s capacities. The outer frame of the reset items will return to white display.
(3) Due to the compatibilities of the equipment and the TV, sometimes the remote codes of some equipment cannot be learned by
the TV. This is normal.
ź
$91(7
lj'9'NJ
5HWXUQ
0(18
7HVW
(17(5 5(7851
5(&$//
/HDUQ
&+ĉĊ
5HVHW
6XFFHHGHG
6HOHFW