Filter
Top Products
49
FUNCTION (continued)
M
ulti Picture Mode(continued)
Activate the Multi Picture Mode in Video Mode
To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press
on the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode ( AV1~4 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
You can switch the Input modes ( DTT/TV and AV1~4) or change
Channels only on the side with Speaker icon.
1. To shift the speaker icon , press button.
Ɣ
The speaker icon will be displayed in front of the Input mode indication.
2. To change the channel of the Sub-screen.
Ɣ
Make sure that mark is located on the Sub-screen.
Ɣ
Press to select channels.
3. To change the Input mode of the Sub-screen.
Ɣ Make sure that the speaker icon is located next to the Input mode indication
of the Sub-screen (Upper).
Ɣ Press Input Select buttons on the remote control. (DTT/TV, AV3~4, and
HDMI 1~3 are available)
4. To exit from the Multi Picture mode, press
button.
NOTE
Ɣ
You cannot select input on both sides simultaneously.
Ɣ
You cannot select the same AV input on both sides simultaneously.
Ɣ
The message “ Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
The selected picture with speaker icon
Main-Screen Sub-Screen
A
B
5 AV3
Table: Mix-and –Match of the Input Modes
DTT TV AV3 AV4 HDMI1 HDMI2 HDMI3
DTT
-
O O O O O O
TV
O
-
O O O O O
AV1
O O O O O O O
AV2
O O O O O O O
AV3
O O
-
O O O O
AV4
O O O
-
O O O
Main
Sub
(O: Available)