Filter
Top Products
20
First time use
CONNECTING A COMPONENT AND STEREO
AUDIO SOURCE TO INPUT 2 or 3 :
Y-PBPR.
1. Connect the cable from the Y OUT of the
Laserdisc/DVD player or HDTV set top box to
the INPUT (Y) jack, as shown on the Rear
panel below.
2. Connect the cable from the P
B
/C
B
OUT or B-
Y OUT of the Laserdisc/DVD player or HDTV
set top box to the INPUT (P
B)
jack.
3. Connect the cable from the P
R
/C
R
OUT or R-
Y OUT of the Laserdisc/DVD player or HDTV
set top box to the INPUT (P
R
) jack.
4. Connect the cable from the AUDIO OUT R of
the Laserdisc/DVD player or HDTV set top box
to the INPUT (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of
the Laserdisc/DVD player or HDTV set top box
to the INPUT (AUDIO/L) jack.
6. Press the INPUTS button, then select INPUT 2 or 3
from the INPUTS menu to view the program
from the Laserdisc/DVD player or HDTV set
top box.
7. Select CABLE, AIR to return to the last channel
tuned.
NOTE: 1
. Completely insert the connection cord
plugs when connecting to rear panel jacks.
The picture and sound that is played back
will be abnormal if the connection is loose.
2. See page 17 for tips on REAR PANEL
CONNECTIONS.
Connecting External Audio/Video Devices
OUTPUT
DVD Player
OR
Back of
DVD Player
OUTPUT
L
R Y PB P
R
HDTV Set-Top Box
PR/CR
PB/CB Y
VIDEO
R
AUDIO
CABLE
or
Air signal
L