Filter
Top Products
60
Setup
Se
lect The Quick Start Option
This feature will select QUICK START UP options. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UP feature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor
any changes and prepare the television to quickly
present a picture. A small amount of electricity is used
to continually monitor signals when this feature is
selected.
Reset The Software
SelectTheQuick Start Option
Setup
Move SEL
Select
Select ON to have the TV tune channels quickly at
1st turn on.
Select OFF to save electricity
Of
f On
This feature shows software information and easy
u
pgrade procedure. This function allows the TV software
to be upgraded by using a flash card (MMC/SD CARD).
If a future software upgrade is required for your TV,
HITACHI will notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. Insert MMC/SD CARD.
2. Press the CURSOR PAD
̆ or ̄ to highlight
UPGRADE
NOW.
3. Press the SELECT button to select and start
upgrading.
4. Unplug the power cord or press the POWER button for
5 seconds when the UPGRADE is complete.
NOTE:
Reset The Software
Setup
Move SEL
Return
MMC Software Upgrade : Vxxxx.xxxx
Upgrade Now
before upgrading.
Reset TV Settings
No Yes
Reset TV Settings
T
his function allows you to Reset all TV Settings to the original factory settings on all modes during the next
power off/on.
2. Press the SELECT button or CURSOR PAD ̈ to select Reset the Software Menu.
3. Use the CURSOR PAD ̄ to access the Reset TV settings option.
4. Select the "YES" option to Reset ALL the TV functions and unplug the power cord or press the POWER button for
1. Use CURSOR PAD ̆, ̄ to highlight functions.
(Select "Yes" to return all settings
to the factory default after main power OFF/ON.)
Please Insert MMC card
Move SEL Select
Reset The Software
Select The Quick Start Option
Set The Closed Captions
Set The Inputs
Set The Power Saving
Setup The Menu Options
Setup
Move SEL Select
Reset The Software
Select The Quick Start Option
Set The Closed Captions
Set The Inputs
Set The Power Saving
Setup The Menu Options
Setup
On-Screen Display
OR
OR
NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes
during the power cord is unplugged once or the POWER button is pressed for 5 seconds .
2. When the Quick Start Option has been set to ON , the option of Reset TV Settings will not operate
unless the power cord is unplugged once or the POWER button is pressed for 5 seconds.
5 seconds.