Filter
Top Products
76
This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions
from an external home control system.
Set AV Control
Move
SEL
Return
If you want to use the AV Control
function, please set the RS232C.
Connected RS232C
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info.
Setup
Move
SEL
Select
Setup
Set AV Control
NOTE: For use with third party home Audio/Video control systems which are commercially available. Please see your dealer
regarding these “non Hitachi” home control systems.
Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.
SETUP
Select this feature to access your CableCARD ID and HOST ID. Please have this information ready when
you call your cable operator (see also page 13).
CableCARD Info
Select the button below to access
your CableCARD ID and Host ID.
Move
SEL
Select
CableCARD Info
Set Stand-By Mode
Upgrades
Set AV Control
CableCARD Info.
Setup
Move
SEL
Select
CableCARD Info.
Setup
This feature will select the source of the Monitor Output.
Set Monitor Out
Move
SEL
Return
Video Out
Monitor
TV Tuner Out
Set Black Side Panel
Set The Inputs
Screen Saver
Menu Preference
Setup
Move
SEL
Select
Set Monitor Out
Set Closed Captions
Setup
Set Monitor Out
Monitor- Select Monitor to output the audio and video signals of the chosen input source (ANT A, ANT B, VID1-VID5) to a VCR or other
A/V device.
TV Tuner Out- Select TV Tuner Out to output the audio and video signals of the last watched Antenna Source (ANT A, ANT B).
Use CURSOR PAD
̆, ̄ to highlight the function to change then press the SELECT button to select the function.
Press EXIT to quit menu or CURSOR PAD ̇ to return to previous menu.
ON-SCREEN DISPLAY