Filter
Top Products
PREPARATION FOR USE - 10 -
19. MUTE button- Press to mute the TV's sound. Press it again to resume the sound.
20. VCR/TV button- Press to select VCR or TV mode.
VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.
TV position: to watch TV or to view on program while recording another.
21. Mode Select buttons
• CATV button- For details, see page 30.
• TV button- For details, see page 30.
• VCR button- For details, see page 30.
22. Power cord- Connect to a standard AC outlet (120V/60Hz).
23. AUDIO OUT jack- Connect to an audio input jack of your audio equipment or another VCR.
24. AUDIO IN jack- Connect to an audio output jack of your audio equipment or another VCR.
25. ANT. IN terminal- Connect to an antenna or CATV.
26. VIDEO OUT jack- Connect to a video output jack of your video camera or another VCR.
27. VIDEO IN jack- Connect to a video output jack of your video camera or another VCR.
28. CH3/CH4 selector switch- Use to select a video output channel (3 or 4) for playback from the VCR.
29. ANT. OUT terminal- Connect to an antenna input terminal of your TV.
NOTE:
SLOW Function- Press both PLAY and PAUSE button on the remote control at the same time to reduce the
playback speed. Slow speed can be controlled by pressing F.FWD button (faster) or REW button (slower).
PREPARATION FOR USE
CABLE CONNECTIONS
For some of the most common types of connections, see the following drawings. Use only one connection. For
any further complex connections, please contact your local dealer or other qualified persons. (You may need
additional accessories which are not supplied).
1 Disconnect the antenna or cable from your TV.
2 Connect the antenna or cable to the ANT.IN jack of your VCR.
3 Connect one end of the coaxial cable (supplied) to the ANT.OUT jack of your VCR.
4 Connect the other end of the coaxial cable (supplied) to the UHF/VHF antenna jacks.