Filter
Top Products
PRESET FOR USE - 19 -
3 Select "CHANNEL SET UP"
Press CH or button repeatedly to point to "CHANNEL SET UP".
Then, press SELECT button.
4 Select "TV" or "CATV"
Press CH
or button repeatedly to point to "TV" or "CATV".
5 Begin channel preset
Press SELECT button once. After scanning, the tuner stops on the lowest memorized channel.
SETTING THE CLOCK
Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as
your time source.
In the example below, the clock is to be set to:
DATE 1st March, 1996
SETTING TIME 5:40PM
NOTE: You must use the remote control for this procedure.
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back of the VCR.
(CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
1 Select the main menu
Press MENU button.
2 Select "INITIALIZE"
Press CH
or button repeatedly to point to "INITIALIZE".
Then, press SELECT button.
3 Select "SETTING CLOCK"
Press CH
or button repeatedly to point to "SETTING CLOCK".
Then, press SELECT button.