Filter
Top Products
OPERATING CONTROLS AND FUNCTIONS - 9 -
tape.
OPERATING CONTROLS AND FUNCTIONS
FRONT VIEW illustration
REMOTE CONTROL VIEW illustration
1. Cassette Compartment
2. REW button- Press to rewind the tape, or to view the picture rapidly in reverse during the playback mode.
(Rewind Search)
3. PLAY button- Press to begin playback.
4. F.FWD button- Press to rapidly advance the tape, or view the picture rapidly in forward during playback.
(Forward Search)
5. PAUSE button- Press to temporarily stop the tape during recording or to view a still picture during playback.
Frame Advance Function- Press to advance the picture by one fram during the still mode.
6. STOP button- Press to stop the tape motion.
EJECT button- Press to remove a tape from the VCR (only on the VCR)
7. REC button- Press to begin manual recording.
IRT button- Press to activate Instant Recording Timer. (only on the VCR)
8. CHANNEL buttons- Press to select desired channels for viewing or recording.
SET function- Press to enter digits when setting program (for example: setting clock or timer program). Press to
select setting modes from on screen menu.
Tracking function- Press to minimize video 'noise' (lines or dots on screen) during playback. (only the VCR)
Press to stabilize the picture in the Still mode when the picture begins to vibrate vertically.
9. Digital display- Displays the clock, timer recording, counter and channel etc.
10. Remote sensor window- Receives the infrared signals from the remote control.
REAR VIEW illustration
11. POWER button- Press to turn VCR on and off. Press to activate a timer recording.
12. NUMBER buttons- Press to select desired channels for viewing or recording. To select channels from 1 to 9,
first press "0" button then 1 to 9.
100/ENT button- When selecting cable channels which are more than 100, press this button first, then press the
last two digits. (To select channel 125, first press "100/ENT" button then press "2" and "5").
13. TAPE SPEED button- Press to set desired recording speed: SP/LP/SLP.
14. VOL button- Press to adjust the desired TV's volume level by using either
or button.
15. MENU button- Press to display the main menu on the TV screen.
16. SELECT button- When setting program (for example: setting clock or timer program), press to determine
your selection and proceed to a next step you want to input. Press to determine setting modes from on screen
menu.
Status function- Press to display the counter on the current channel number and current time on the TV screen.
17. COUNTER MEMORY button- Press to set counter memory on and off.
18. ADD/DELETE button- Press to add or delete channel numbers during channel preset. Press to cancel a
setting of timer program. Press to correct digits when setting program (for example: setting clock or timer
program).
COUNTER RESET button- Press to reset counter to 0:00:00.