Filter
Top Products
AUTO CLOCK SETTING
• Confirm that the antenna connections are correct and the CHANNEL PRESET completes first.
• Use the remote control for this procedure.
• Be sure to check that the "PWR." and the "VCR" indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to
match the channel selected on the TV.
• If the VCR is connected directly to a cable converter box, the cable converter box must turn on and select
the local PBS channel itself. Then, the VCR must be set to the output channel of the cable converter box
(usually channel 3 or 4), to be able to set up and automatically correct the clock.
1 Select main menu
Press the MENU button until the main menu appears.
• If the clock is not set yet, CLOCK SET menu appears immediately when you press the MENU button. In
this case, go to step [3].
MENU
→TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 Select "CLOCK SET"
Press the PLAY/ or STOP/ button to point to "CLOCK SET".
Then press the F.FWD/
button.
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
→CLOCK SET
LANGUAGE SELECT
3 Select "AUTO CLOCK"
If [ON] appears beside "AUTO CLOCK", press the F.FWD/ button.
• If it is not, press the PLAY/
or STOP/ button to point to "AUTO CLOCK".
Then, press the F.FWD/
button twice.
CLOCK SET
→AUTO CLOCK [ON]
MANUAL
D.S.T [ON]