Filter
Top Products
4 Select the PBS channel
First, press the PLAY/ or STOP/ button to point to "MANUAL". Then, press the F.FWD/ button.
Next, press the number buttons or PLAY/
or STOP/ button to select the PBS channel.
• If you leave it set to "AUTO" when the clock is not set yet, the VCR read your local PBS channel once
time every 10 minutes until the VCR get the current time.
AUTO CLOCK
AUTO
→MANUAL [ON]
CH --
5 The VCR begin to get the current time
Press the F.FWD/
button. "AUTO CLOCK" flashes on the TV screen. After a few minutes, flashing
stops and current time appears on the display.
NOTE:
• When your local PBS channel is incorrect or is not received, the clock cannot be set automatically. In this
case, follow "MANUAL CLOCK SETTING" on page 17.
MANUAL CLOCK SETTING
We suggest that you use a TV or radio station as your time source.
In the example below, the clock is to be set to:
DATE 20th March , 2000
SETTING TIME 5:40PM
• Use the remote control for this procedure.
• Be sure to check that the "PWR." and the "VCR" indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to
match the channel selected on the TV.
1 Select main menu
Press the MENU button until the main menu appears.
• If the clock is not set yet, CLOCK SET menu appears immediately when you press the MENU button. In
this case, go to step [3].
MENU
→TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 Select "CLOCK SET"
Press the PLAY/ or STOP/ button to point to "CLOCK SET".
Then press the F.FWD/
button.
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
→CLOCK SET
LANGUAGE SELECT