Filter
Top Products
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM - 65 -
Note: This number can be up to eight digits. If you enter a wrong digit, press the CLEAR button and enter the
correct one.
(5) Press the number buttons to enter the PlusCode number in the VCR's memory.
The start time and channel will appear. Check the details of the program. • If "Err" appears, check the PlusCode
of the program and try to enter it again.
(6) Press the PROGRAM button to complete your programming or continue with additional programs.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have programmed.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If using a cable box the VCR can control, turn on the cable box before the time the recording is to begin. Please
refer to "Cable Box Setup", on Page 26 in the "First Time Setup" section.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
Caution of VCR Plus+ Recording
After entering a PlusCode number, check the information displayed with the "PROGRAM REVIEW". If there is
(are) any unnecessary . program(s), please cancel or correct it (them). Please refer to Page 52, "Reviewing what
you have programmed".
To go into the recording mode:
1. Press the POWER button to turn the VCR on.
2. Turn on TV and select the video channel (3 or 4).
3. Press the DISPLAY button.
4. Press the (5) button to switch the recording mode.