Filter
Top Products
COPYING TAPES FROM A CAMCORDER - 70 -
COPYING TAPES FROM A CAMCORDER
• Hookup
You may use your VCR to copy tapes from any camcorder onto standard VHS cassette tapes.
Note: If your camcorder is not stereo (has only one audio plug), connect it into the AUDIO IN-L input on the back
of the VCR.
* It is not necessary to connect the S-VIDEO jack
Camcorder Hook-up Illustration.
• To copy from a camcorder
BEFORE YOU BEGIN...
Connect the camcorder's AV output cable to the audio/video jacks on the back of your VCR.
1 Press the AVX button twice on remote control, to display L2 (line) on the TV display.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 Press the REC, then PAUSE buttons on the VCR remote control. The VCR will go into Record/ Pause.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3 Press the PLAY button on the camcorder. You will see the camcorder tape being played on the TV.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 When you see the part of the Camcorder tape you wish to copy, press the PAUSE button again to
release pause and start copying the camcorder tape.
• Press the STOP button to finish recording.