Filter
Top Products
43
2 Press the (2) button to select the VCR SETUP operation.
3 Press the (6) button to set the SAP option to "ON".
4 Press the (5) button to set the STEREO/MONO option to "STEREO".
5 Press the GUIDE button to end the setting.
6 Follow the Step 1 through 5 on "Basic Recording Steps" on pages 37 and 38.
Stereo vs. mono sound
When you select the STEREO option in the initial setup operation, your VCR records in
stereo any station that broadcasts stereo sounds. When a TV channel broadcasts in
stereo, you'll see a stereo indicator on the TV screen.
Set to MONO if the stereo signal is weak and the sound is too "noisy".
Note: When you select MONO, sound is recorded as mono even when a channel broadcasts
in stereo.