Filter
Top Products
54
6 Press the (5) button to choose recording speed SP (standard play) or EP
(extended play).
The screen will display all the details of the program you chose. Check the CH number
to make sure it is the right one. If not, you need to check your VCR Plus+ channel setup
again.
7 Review the screen to be sure everything is set as you want, then press the
PROGRAM button to complete your programming or continue with additional
programs.
8 Press the POWER button to turn off the VCR.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have
programmed.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (With the safety tab still attached) to record on.
• If using a cable box the VCR can control, turn on the cable box before the time the
recording is to begin. Please refer to "Cable Box Setup", on Page 26 in the "First
Time Setup" section.
Important: Your timed recording settings take effect when you turn off the power on the
VCR.
Caution of VCR Plus+ Recording
After entering a PlusCode number, check the information displayed with the "PROGRAM
REVIEW". If there is (are) any unnecessary program(s), please cancel or correct it (them).
Please refer to Page 51, "Reviewing what you have programmed".
Using the VCR Plus+ system to record a program (by using the VCR's
display)
You can use the VCR Plus+ system to program the timer, observing the VCR's display,
without turning on the power to the VCR and TV.