Hitachi VT-FX6500A VCR User Manual


 
Press the PLAY/ or STOP/ button to point to "CLOCK SET". Then, press the F.FWD/ button.
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
3 Set the "D.S.T." (Daylight-Savings Time) to [ON]
Press the PLAY/ or STOP/ button to point to "D.S.T.". Then, press the F.FWD/ button so that
[ON] appears.
CLOCK SET
AUTO CLOCK [ON]
MANUAL
D.S.T. [ON]
4 To return to TV mode
Press the RESET/EXIT button
TO CANCEL THE DAYLIGHT-SAVINGS TIME
Repeat steps [1] to [3]. Then, press the F.FWD/ button so that [OFF] appears on the menu. Press the
RESET/EXIT button to return to TV mode.
TO DELETE OR ADD CHANNELS
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can later add the
deleted channel into the memory again.)
• Use the remote control for this procedure.
• Be sure to check that the "PWR." and the "VCR" indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR
to match
the channel selected on the TV.
1 Select main menu
Press the MENU button until the main menu appears.
MENU
TIMER PROGRAMMING
AUTO REPEAT [OFF]
PICTURE SELECT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 Select "CHANNEL SET UP"
Press the PLAY/ or STOP/ button to point to "CHANNEL SET UP".
Then press the F.FWD/
button.
3 Select "MANUAL SET UP"
Press the PLAY/
or STOP/ button to point to "MANUAL SET UP".
Then, press the F.FWD/ button.
CHANNEL SET UP
AUTO SET UP
MANUAL SET UP
4 Enter the desired channel number