Filter
Top Products
Press the number buttons or the PLAY/ or STOP/ button until your desired channel number appears. (Example:
CH30)
MANUAL SET UP
CHANNEL 30 (TV)
ADD
5 Delete it from memory
Press the F.FWD/
or REW/ button so that "DELETE" flashes on the TV screen.
• To delete another channel, repeat steps [4] and [5]
• If you press F.FWD/
or REW/ button again, the channel is memorized again.
MANUAL SET UP
CHANNEL 30 [TV]
DELETE
- DELETED –
MANUAL SET UP
CHANNEL 30 [TV]
ADD
- MEMORIZED -
6 Exit the preset mode
Press the RESET/EXIT button on the remote control to return to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL(CH)
or
button.
CHANNEL SET UP AGAIN
Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you
DO NOT
have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have
theCH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select
the Box to the channel you wish to view or record.
• Use the remote control for this procedure.
1) Press the MENU button until the main menu appears.
2) Press the PLAY/
or STOP/ button to point to "CHANNEL SET UP". Then, press the F.FWD/
button.
3) Confirm "AUTO SET UP" is pointed to, then press the F.FWD/
button. After scanning, the tuner stops
at the lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
CHANNEL SET UP
→AUTO SET UP
MANUAL SET UP
SELECTING THE LANGUAGE